Chemical Resistant Epoxy Coating
Protect Concrete, Steel & Other Materials From Non-Oxidizing Acids & Alkalines
100% solids zero VOC - meets even the toughest low VOC standards
Product #2 Chemical Resistant Coating
GENERAL DESCRIPTION
Chemical Resistant Epoxy Coating Product #2 is a two component, 100%
solids, Zero "0" VOC epoxy chemical resistant coating used to protect chemical concrete, steel
and other structural materials from non-oxidizing acids and alkalines for both
interior and exterior applications.
APPLICATIONS
Typical Uses
- Aisle Ways
- Assembly Plants
- Bakeries
- Basement Floors & Walls
- Block Walls
- Bottling Plants
- Break Rooms
- Cafeterias
- Canning Plants
- Car Washes
- Cells
- Chemical Processing Areas
- Chemical Pump Areas
- Chemical Storage Area
- Church Floors
- Classroom Floors
- Corridors
- Educational Facilities
- Entrances
- Filters
- Food Plants
- Fork Lift Areas
- Health Care Facilities
- Hospitals
- Kennels
- Kitchens
- Laboratories
- Law Enforcement Facilities
- Laundries
- Leveling concrete
- Loading docks
- Locker Rooms
- Machine Shops
- Manufacturing Areas
- Marine Surfaces
- Meat Preparation Areas
- Mortuaries
- Nuclear Plant Floors
- Offices
- Patching concrete
- Photography Processing Areas
- Power Plants
- Printing Plants
- Produce Preparation Areas
- Pools
- Ramps
- Research Facilities
- Rest Rooms
- Restaurants
- Secondary Chemical Containment
- Semiconductor Plants
- Sewer Plants
- Shops
- Shopping Centers
- Shower Rooms
- Stores
- Show Rooms
- Supermarkets
- Tanks
- Veterinary Facilities
- Water Plants
- Warehouses
- & many others
ADVANTAGE
- Excellent chemical resistance
- Strong yet resilient
- Built in flexibility
- Sprayable
- Meets USDA standards
- 100% Solids - 0.0 lbs VOC
SURFACE PREPARATION
Surface to receive
Product #2 Chemical Resistant Epoxy Coating must be clean and sound. Remove all dirt, laitance, grease curing
compounds and other foreign matter by sandblasting, or mechanical abrasion.
Remove water and dust from all surfaces with an oil free blast immediately prior
to application.
See Epoxy.com' Surface
Preparation Guide form
more details.
MIXING INSTRUCTIONS FOR EPOXY #2
Temperature of
Product #2 Chemical Resistant Epoxy Floor Coating must be
50° F or above at time of mixing. Stir each component separately before
blending. Mix two parts by volume of Part A with one part by volume of Part B
for three minutes with a low speed electric drill motor equipped with a mixing
paddle.
APPLICATION PROCEDURES FOR EPOXY #2
Epoxy Primer Product #899 (or for
a more chemical resistant primer Product
#12) is
recommended for concrete surfaces. Apply with a roller, brush, or spray equipment. Two coats are
recommended. Thickness per coat should be
7-10 mils. Seven days cure time is required to reach
maximum chemical resistance. For more information before installing please see
Epoxy.com installation tips at
https://www.epoxy.com/install.htm.
LIMITATIONS - CHEMICAL RESISTANT COATING #2
Refer to Product #2 Chemical Resistance Chart for field tested
results of common industrial chemicals that Product #2 has been exposed to. New
concrete should be at least 28 days old. Temperature of substrate must be above
50° F. DO NOT thin.
SAFETY PRECAUTIONS
Prolonged or repeated exposure may cause eye and skin irritation. If contact
occurs, wash immediately and seek medical help. Use safety glasses with side
shields and wear protective rubber gloves.
CLEANING
All tools and equipment should be cleaned before the system gels. Use MEK,
Acetone, or any lacquer solvent.
APPLICATION PROPERTIES at 77° F
|
| Mix Ratio |
2:1 By Volume |
| Viscosity (mixed) |
1800 CPS |
| Pot Life (200 gr.) |
40 minutes |
| Tack Free to Touch |
6-8 Hours |
| Initial Cure |
24 Hours |
| Final Cure |
7 Days |
| Packaging (unit size) |
3 gal., 15 gal. |
| Standard Colors |
Black, White, & Colors Listed Below |
 Click
the picture of
color card for a larger version of this picture of the color chart.
Please note: The picture to the right is a photographic reproduction of
the color card for this product. The photo reproduction process and your
monitor and/or printer will change these colors. This chart is to give you an
idea of the colors available and not intended for critical color selections.
TENSILE PROPERTIES |
| Tensile Strength (ASTM D-638) |
5500 p.s.i. min. |
| Elongation |
10% |
Chemical Resistance
See the Chemical
Resistance Chart for Chemical Resistant Epoxy Coating Product #2 set side by side with other
commonly used Epoxy.com Coating Systems.
Other customers who visited this page also visited:
Material Required Per 1000 SF |
| Good |
SF/ Gal |
Thickness in Mils |
Gallons |
| 1 Coat 899 Primer Pigmented |
250 |
6.4 |
4 |
| 1 Coat of 1 Pigmented |
200 |
8 |
5 |
| Total |
|
14.4 |
|
|
|
|
|
| Better than Good |
|
|
|
| 1 Coat 899 Primer Pigmented |
250 |
6.4 |
4 |
| 1 Coat of 1 Pigmented |
160 |
10 |
6.25 |
| Total |
|
16.4 |
|
|
|
|
|
| Much Better |
|
|
|
| 1 Coat 899 Primer Clear |
250 |
6.4 |
4 |
| 1 Coat of 1 Pigmented |
200 |
8 |
5 |
| 2nd Coat of 1 Pigmented |
200 |
8 |
5 |
| Total |
|
22.4 |
|
|
|
|
|
| Best |
|
|
|
| 1 Coat 899 Primer Clear |
250 |
6.4 |
4 |
| 1 Coat of 1 Pigmented |
160 |
10 |
6.25 |
| 2nd Coat of 1 Pigmented |
160 |
10 |
6.25 |
| Total |
|
26.4 |
|
|