Epoxy.com Heavy Duty Industrial Epoxy and Urethane Coating Resin Systems
Here are listing of Epoxy.com epoxy coatings and urethane coatings. The
Epoxy.com Products listed below are either pigmented or available in
pigmented. Related products not specifically covered below are
Primers
and Sealers.
Epoxy Coatings 100% Solids Zero "0" VOC
Epoxy All Purpose Coating Product
#1 is a 100% solids epoxy Hi-Build epoxy
coating used for high foot and light forklift traffic areas where abrasion
resistance is required; for protection against mild corrosion; and as a
decorative waterproof coating for walls, floors, tanks, etc. Also available
fast, and Cold Temperature Cure versions.
Zero (0) VOC Epoxy.
Epoxy Product #1W
is a two component, 100% solids epoxy Hi-Build epoxy coating used for high
indoor traffic areas where abrasion resistance is required; for protection
against mild corrosion; and as a decorative waterproof coating for walls,
tanks, etc. Zero (0) VOC Epoxy.
Chemical Resistant
Epoxy Wall Coating Product #2W is a two component, 100%
solids epoxy chemical resistant coating used to protect chemical concrete,
steel and other structural materials from non-oxidizing acids and alkalines
for both interior and exterior applications. Zero (0) VOC Epoxy.
Clear Chemical Resistant Epoxy #15 on a dental Lab Top.
Photo used with permission of :
Dawn Durbin, DDS, PC
Product #15 Chemical Resistant Epoxy Resin
Flooring / Floor Resurfacing System for Seamless Epoxy Quartz
Flooring is a two component, seamless 100% solids clear epoxy
flooring / floor resurfacing system with High Chemical
Resistance. The epoxy may be applied as a coating, or combined
with silica sand or Epoxy.com multi-colored quartz aggregate
to produce a durable, easy to maintain floor, on both new and old
surfaces. Epoxy.com Product #15 is also commonly used
for resealing epoxy bonded stone, to seal acid stained floors and as a
carbon composite fiberglass layup resin, and as a clear chemical
resistant coating.
Epoxy Coating Product #315BC and Base Coat for the
315Chip
Flooring System. It can also be used as a stand alone coating.
If Epoxy.com Product #315BC is used as a stand alone coating over concrete,
it is recommended that you first prime with
Product #899 Primer. Zero (0) VOC Epoxy.
Epoxy Coating Product #315BC - Fast Same as Product #315BC Polymeric
Coating for Base Coat for the
315Chip Flooring System, but with a fast cure. Zero (0) VOC
Epoxy.
Epoxy Coating Product #315BC-Cold Similar to Product #315BC
Polymeric Coating for Base Coat for the
315Chip Flooring System, but with a cold temperature cure.
Zero (0) VOC Epoxy.
Epoxy.com
Product #674 - Electrostatic Dissipative Urethane
Coating is a two component, Electrostatic
Dissipative chemical resistant, polyurethane coating.
The high gloss finish offers excellent abrasion
resistance, chemical and stain resistance, and superior
color retention. Epoxy.com Product #674 - Electrostatic Dissipative
Urethane Coating can be used equally well on
vertical or horizontal surfaces. It is ideal for
concrete floors and walls in warehouses, storage
facilities, aircraft hangars, animal housing, and
vehicle maintenance facilities. Available in both clear
and pigmented formulations,
Epoxy.com Product #674
- Electrostatic Dissipative Urethane Coating can be
used as a finish coating option for most Epoxy.com
Flooring Systems
Epoxy.com Product #675
Electrostatic Dissipating Water Borne Epoxy Topcoat is a
pigmented, water emulsion epoxy electro-static dissipative finish
designed to have maximum penetration into concrete surfaces to provide
high bond strength and adhesion. It has very low odor and can be used in
occupied areas as a finish sealer in Thin-Film Electro-Static
Dissipative Coating Systems.
Epoxy.com
Product #1 Fast - is a shorter potlife, and faster setting
version of Epoxy.com Product #1,
Zero (0) VOC Epoxy.
Epoxy.com Product #1 Cold Temperature Cure
is a version of Epoxy.com Product #1
that sets even faster than Product#1 Fast.
Typically used in colder temperatures, or where an very fast cure is
required. Zero (0) VOC Epoxy.
Epoxy.com Product #2 Fast is a shorter potlife, and
faster setting version of Product #2
Zero (0) VOC Epoxy.
Epoxy.com Product #2 Cold Temperature Cure & is a version of
that sets even faster than Epoxy.com Product#2 Fast Cure. Typically
used in colder temperatures, or where an very fast cure is required.
Zero (0) VOC Epoxy.
Epoxy.com Product #204 Cold
Temperature Cure Polymeric Coating
- is a specially formulated coating for cold temperature applications.
Able to cure at temperatures as low as 35°F. It is often used in coolers and
food preparation areas that require constant low temperatures. It is also
frequently used in room temperature applications to meet super-fast cure,
limited shutdown needs. Zero (0) VOC Epoxy.
Chemical Resistant Novolac Epoxy
Epoxy.com Product #630 Novolac Coating/Mortar Binder - a
100% solids epoxy Novolac ideal for harsh chemical and solvent resistant
applications. It is ideal for use as a troweled mortar, slurry binder,
and coating for concrete and steel in extremely corrosive areas where
resistance to 98% sulfuric acid or other strong caustics is needed.
Epoxy.com Product #630 Novolac Coating/Mortar Binder is ideal for
use as a protective coating for concrete and steel in the extremely
corrosive areas of chemical plants and pulp mills secondary containment
areas, water and waste treatment, and gas and electric utilities.
Zero (0) VOC Epoxy.
Epoxy.com Product #633 Novolac
Coating is a 100% solids epoxy Novolac coating ideal for harsh
chemical and solvent resistant applications. It is used in secondary
containment, solven storage, pump pads, trenches, and other high exposure areas.
It is ideal for use as a protective coating for concrete and steel in the
extremely corrosive areas of chemical plants and pulp mills secondary
containment areas, water and waste treatment, and gas and electric utilities.
Epoxy.com Product #633 Novolac Coating is commonly used as a seal coat for
Epoxy.com MORTAR SYSTEMS where chemical resistant performance is
required. Zero (0) VOC Epoxy.
Epoxy.com Product #2 Chemical
Resistant Coating is a two component, 100% solids epoxy
chemical resistant coating used to protect chemical concrete, steel and
other structural materials from non-oxidizing acids and alkalines for both
interior and exterior applications. Available in normal, fast, and Cold
Temperature Cure. Also available fast, and Cold Temperature Cure
versions. Zero (0) VOC Epoxy.
Epoxy.com Product #2W
Chemical Resistant Wall Coating is a two component, 100%
solids epoxy chemical resistant coating used to protect chemical concrete,
steel and other structural materials from non-oxidizing acids and alkalines
for both interior and exterior applications. Zero (0) VOC Epoxy.
Coal Tar Epoxy Product #209
is a two component 100% solids epoxy coating designed for applications
to petroleum contaminated concrete, coating asphalt based surfaces,
clean concrete, cement,
and properly prepared
steel.
Epoxy.com Product #629 Chemical
Resistant Conductive Flooring is a 100% solids
epoxy Novolac Conductive coating ideal for severe chemical and
solvent storage requiring conductive and spark proof surfaces.
Applied at a nominal 1/16 inch, the Epoxy.com
Product #629 Chemical Resistant Conductive Flooring offers
the superior chemical resistance of a Novolac Resin System while
maintaining a conductive surface. Zero (0) VOC Epoxy.
Epoxy.com Product
#402 - 2 Component Chemical Resistant Coating - is a two
component1 chemical resistant polyurethane coating with gloss
finish offers excellent abrasion resistance, chemical and stain
resistance, and color retention. Epoxy.com Product
#402 - 2 Component Chemical Resistant Coating can be used equally
well on vertical or horizontal surfaces. It is ideal for concrete floors
and walls in warehouses, storage facilities, aircraft hangers, animal
housing, and vehicle maintenance facilities.
Product is not for use in California Use
Product #406
- Two Component Low VOC Chemical Resistant Urethane Coating when a
California Compliant low VOC product is required, or desired.
Epoxy.com Product #406 - Two Component Low VOC Chemical Resistant
Urethane Coating - is a low VOC compliant urethane that
meets all federal and state environmental air quality standards. The
high gloss finish offers excellent abrasion resistance, chemical and
stain resistance, and superior color retention.Epoxy.com
Product #406 - Two Component Low VOC Chemical Resistant Urethane Coating
can be used equally well on vertical or horizontal surfaces. It is ideal
for concrete floors and walls in warehouses, storage facilities,
aircraft hangars, animal housing, and vehicle maintenance facilities.
Available in both clear and pigmented formulations, Epoxy.com Product #406 - Two Component Low VOC Chemical Resistant
Urethane Coating can be used as a finish coating option for most
Epoxy.com Flooring Systems.
Epoxy.com Product #467 Urethane Top Coating
- is a single component aliphatic urethane topcoat used to seal Epoxy.com Elastomeric Urethane Decking Systems. Exhibiting excellent
resistance to ultraviolet degradation, Epoxy.com Product #467
Urethane Top Coating provides a high-build, chemically resistant finish.
Epoxy.com Product #488 UV Stable Aliphatic Polyurethane Coating
is a two component, ultra high solids, aliphatic polyurethane designed
to provide high gloss, UV stable (non-yellowing) and chemical resistant
protection. Epoxy.com Product #488 Aliphatic
Polyurethane Coating is a superior, new generation product
exhibiting fast cure time and excellent stain resistance.
Epoxy.com Product #488 Aliphatic Polyurethane Coating has very low
odor and can be applied indoors in occupied areas. Epoxy.com Product #488 Aliphatic Polyurethane Coating is generally
used as a clear or pigmented high gloss finish Epoxy.com decorative and
industrial flooring systems such as Epoxy.com Chip Flooring (garage
floor finish).