Elastomeric Joint Sealant, Caulking, Crack
Fillers and Sealers
Epoxy Resin Saw Cut Joint Sealants, Epoxy Crack
Fillers
Clear Epoxy Sealers and Primers
Product #10
Lo-Mod Adhesive- is a useful tool for rebuilding a damaged
substrate, where an elastomeric system will be installed over it.
Epoxy.com Product #10 is a 100% solids Lo-Mod (semi-flexible) Low
Viscosity (very thin) adhesive used as a binder for epoxy mortar systems
in patching and grouting applications, as a seal coat for non-skid
surfaces outside, and as a primer to insure high bond strength for
coatings and patches. Zero (0) VOC Epoxy.
Product #11 Epoxy Joint Filler useful where you need
something semi-flexible, but need it to hold up to heavy weight.
Epoxy.com Product #11 is a 100% solids flexible epoxy joint filler for
saw-cut joints of concrete slabs on grade, or to repair existing slabs.
Product #11 absorbs the impact and shock of heavy loads and steel
wheeled traffic, preventing erosion of control joint edges.
Product #655 Epoxy Novolac Chemical Resistant Crack Filler
is a two component 100% solids Epoxy Novolac crack filler (gel)
designed for shallow repairs on either vertical or horizontal
surfaces. Because Epoxy Novolac Product #655 is a 100% solids formulation, it can be
applied thicker on horizontal surfaces when required.
Product #2704
Epoxy Gel Super
Fast Cure is a fast setting, 100% solids epoxy crack
gel and filler used to line, patch, or repair floor and
wall surfaces. Epoxy Gel Super Fast Cure Product #2704 is the ideal material for repair of surfaces
damaged from environmental or chemical attack. Epoxy Gel Super Fast
Cure Product #2704 can also be
used as a base material beneath coating, slurry, and mortar systems to repair
before coating.
PRODUCT #2708 Under Water Pourable Epoxy Crack and Joint Filler
is a two component 100% solids epoxy designed for
applications where contamination from water cannot be controlled or for
underwater repairs and applications.
Primers
Product #12
Epoxy Chemical Resistant Primer and Epoxy Sealer is
a two component, seamless 100% solids epoxy primer system with
High Chemical Resistance Epoxy and High Bond Strength. The epoxy
may be applied as a primer for most High End Industrial
coatings. Makes an excellent stand alone sealer.
Product #100MR
Moisture Tolerant Epoxy Primer and Epoxy Basecoat this new
and improved version of Product #100 installs easier and costs lest than
the Original Product #100. consists of a unique water based epoxy
technology which allows the contractor to install epoxy resin floor
systems and other moisture sensitive floor coverings on new concrete (5
days old) without fear of moisture entrapment. Product 100MR Moisture
Tolerant Primer and Base Coat is applied in a two coat application.
Product 100MR Moisture Tolerant Primer and Base Coat is the
primer/basecoat used in various products
Product #830
is a two component modified epoxy system designed to seal concrete and
reduce moisture vapor transmission prior to applying finished flooring.
Epoxy.com Product #830 has proven to reduce moisture vapor emissions and
be resistant to damage from high alkalinity. Epoxy.com Product #830 is
an environmentally friendly material containing no hydrocarbons or other
solvents making it zero (0) VOC.
Product #899 Epoxy Primer
- a damp primer that is a 100% solids Low-Mod Low Viscosity Primer and Sealer. It
may be used as a primer for any Epoxy.com product, or as a stand alone
sealer.
|