Epoxy.com Listing of Elastomeric Coatings, Elastomeric Decking and  Elastomeric Waterproofing Membranes

Useful Product to Prepare the Substrate for Elastomeric Coatings, Elastomeric Decking and Elastomeric Membranes

* Product #10 Lo-Mod Adhesive-  is a useful tool for rebuilding a damaged substrate, where an elastomeric system will be installed over it.  Epoxy.com Product #10 is a 100% solids Lo-Mod (semi-flexible) Low Viscosity (very thin) adhesive used as a binder for epoxy mortar systems in patching and grouting applications, as a seal coat for non-skid surfaces outside, and as a primer to insure high bond strength for coatings and patches.  
* Product #11 Epoxy Joint Filler - is not as elastomeric as Product #900 and Product 901, but it is useful where you need something semi-flexible, but need it to hold up to heavy weight.  Epoxy.com Product #11 is a 100% solids flexible epoxy joint filler for saw-cut joints of concrete slabs on grade, or to repair existing slabs.  Product #11 absorbs the impact and shock of heavy loads and steel wheeled traffic, preventing erosion of control joint edges.
* Product #703 Flexible Gel Adhesive  is a non-sagging material that is ideal for repairs on vertical or overhead surfaces.

Elastomeric Coatings, Elastomeric Decking and Elastomeric Waterproofing Membranes. 

* Product #32 Flexible Epoxy Membrane  is a flexible resin used as an epoxy membrane and as a Product #32 mortar. Epoxy.com  Product #32 is a two component, 100% solids epoxy used as a base in many Epoxy.com  Floor and Mortar Systems. Product #32 resists cracking caused by horizontal substrate movement, providing a crack resistant, resilient, sound absorbent, waterproof, durable floor. Epoxy.com  Product #32 offers stress-relieving properties for floor slabs that show movement or vibration. Product #32 is excellent for use in areas such as mechanical equipment rooms, large animal rooms and activity centers.
*  PRODUCT #400  Chemical Resistant Urethane  is a two component, chemical resistant, polyurethane coating. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and superior color retention.  It can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors.  It is used as a finish coating option for most Epoxy.com Flooring Systems.
*  Product #401 - Urethane Coating is a two (2) component, high-solids, urethane coating. Urethane Coating is a two (2) component, high-solids, urethane coating. Epoxy.com PRODUCT #401 is a superior coating that provides the ultimate in weather resistance. Epoxy.com PRODUCT #401 offers outstanding abrasion resistance, excellent chemical resistance and color retention in severe conditions. Epoxy.com PRODUCT #401 offers the utmost in a light stable, weather-resistant coating. Epoxy.com PRODUCT #401 is an excellent coating for concrete, wood and primed steel. Brush, roller or spray can apply Epoxy.com PRODUCT #401. PRODUCT #401 is a convenient 2:1 ratio, by volume, with a pot life of six (6) hours plus.
* Product #402  - 2 Component Chemical Resistant Coating -  is a two component1 chemical resistant polyurethane coating with gloss finish offers excellent abrasion resistance, chemical and stain resistance, and color retention. Epoxy.com PRODUCT #402 can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangers, animal housing, and vehicle maintenance facilities. Product is not for use in California
* Product #407 Aliphatic Traffic Bearing Membrane is a two component, ultra high solids aliphatic polyurethane elastomeric membrane. When applied, it is resilient and accommodates movement in concrete substrates. Epoxy.com Product #407 is used as a top coat traffic bearing membrane or non-skid coating that retains color and physical properties when exposed to harsh UV conditions. Epoxy.com Product #407 is used as a system with Epoxy.com Product #882, and may be applied as the top coat on Epoxy.com Product #409 to maximize cost effectiveness. Epoxy.com Product #407 cures at ambient temperatures and is impermeable to moisture, oils, mild acids, gasoline, and alkalies.
* 409 Traffic Bearing Membrane   is a Resilient Traffic Bearing Membrane    is a 100% solids, ambient cure impermeable elastomer.  PRODUCT #409   is resistant to moisture, oils, mild acids, gasoline, and alkalies.  PRODUCT #409  when applied to concrete or other surfaces, is resilient and accommodates movement in concrete substrates.  PRODUCT #409  is used as a traffic bearing membrane or non-skid coating that retains color and physical properties when exposed to harsh UV conditions. 
* Product #410 replaced by  409 Traffic Bearing Membrane
* Epoxy.com  Product # 441  is a two component water-based aliphatic (non-yellowing) polyurethane. It is free of the health and environmental problems normally found in solvent-based urethanes, while maintaining excellent performance properties.  Product # 441  polyurethane provides a matte finish.  Product # 441  has good chemical, stain, and mar resistance. In addition, it’s easy to clean and has excellent color retention under heavy foot traffic. It is a high performance coating for use in a variety of seamless floor and wall coating systems.  Product # 441  eliminates the strong solvent odor normally associated with many high performance materials. It’s ideal for topcoats and finishes that require high abrasion resistance. Typical application areas are clean rooms, hospitals, pharmaceutical facilities, stained concrete, wood floors, and as a seal coat for most Epoxy.com  floor and wall coating systems.
* #449 Elastomeric Polyurethane Membrane Waterproofing is a two-component, modified elastomeric material. After mixing and curing it  forms a tough, flexible waterproof membrane.  Epoxy.com Product #449 Membrane is applied to horizontal surfaces of concrete, steel or wood to prevent penetration of moisture and other deleterious substances.  Typical applications are between slab waterproofing above and below grade.
* Product #600 Flexible Novolac is a two-component, 100% solids epoxy coating based on multi-functional high performance flexibilized resin. PRODUCT #600 provides corrosion resistant protection to steel, other metals and concrete. It has excellent resistance to chemicals up to 300oF.  It is resistant to continuous immersion in water up to 212oF . PRODUCT #600 is formulated in a convenient 1 to 1 ratio, by volume mix ratio and has a long pot life to simplify application. PRODUCT #600 is more effective in applications which entail force curing.
*  PRODUCT #674 - Electrostatic Dissipative Urethane Coating   is a two component, Electro Static Dissipative chemical resistant, polyurethane coating. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and superior color retention. Epoxy.com PRODUCT #674 can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangars, animal housing, and vehicle maintenance facilities. Available in both clear and pigmented formulations, Epoxy.com PRODUCT #674 is used as a finish coating option for most Epoxy.com Flooring Systems.
* Product #675 Electrostatic Dissipating Water Borne Epoxy Topcoat-a pigmented, water emulsion epoxy electro-static dissipative finish designed to have maximum penetration into concrete surfaces to provide high bond strength and adhesion. It has very low odor and can be used in occupied areas as a finish sealer in Thin-Film Electro-Static Dissipative Coating Systems.

Primers for Elastomeric Coatings, Elastomeric Decking/Flooring and Elastomeric Membranes

* 810 Primer for Polyurea  is a two-component, clear, VOC compliant floor coating. PRODUCT #810 is fast drying and will cure in temperatures as low as 35°F. Its convenient 2A:1B mixing ratio, no induction time and long pot life simplify mixing and application. PRODUCT #810 protects by penetrating concrete or wood and has excellent adhesion to damp concrete, it is an excellent concrete primer.
* Product #830 is a two component modified epoxy system designed to seal concrete and reduce moisture vapor transmission prior to applying finished flooring. Epoxy.com Product #830 has proven to reduce moisture vapor emissions and be resistant to damage from high alkalinity. Epoxy.com Product #830 is an environmentally friendly material containing no hydrocarbons or other solvents making it zero (0) VOC.
* Product #844 Concrete Membrane Deck Primer is a 100% solids, two (2) component polyurethane primer. This thin film primer promotes long term wear and superior adhesion of the Product #409 Resilient Traffic Bearing Membrane. The Product #844 penetrates and seals the surface to allow for a smoother, pinhole free application.
*

Epoxy.com Product #882 Concrete Primer Concrete Membrane Deck Primer is a 100% solids, two (2) component polyurethane primer. This thin film primer promotes long term wear and superior adhesion of the Epoxy.com Product #409 Traffic Bearing Membrane Resilient Traffic Bearing Membrane. The Epoxy.com Product #882 Concrete Primer penetrates and seals the surface to allow for a smoother, pinhole free application.

* Product #899 Epoxy Primer - a damp primer the is a 100%  solids Low-Mod Low Viscosity Primer and Sealer. It may be used as a primer for any Epoxy.com ™ product, or as a stand alone sealer.

Epoxy.com Elastomeric Joint Sealants for use with Elastomeric Coating, Elastomeric Decking  and Epoxy.com Elastomeric  Waterproofing Membranes

* Product #900 Polymeric Caulking- Gun Grade is a 2 part chemically cured elastomers. They provide a flexible and watertight seal between concrete, masonry, metals, glass, wood, and other construction materials.  Product #900  (Gun Grade)/  Product #901  (Pourable) are mixed just prior to application. Color is light gray. (Other colors are available on special order.)
* Product #901 Polymeric Joint Sealant - Pourable Grade is a 2 part chemically cured elastomers. They provide a flexible and watertight seal between concrete, masonry, metals, glass, wood, and other construction materials.  Product #900  (Gun Grade)/  Product #901  (Pourable) are mixed just prior to application. Color is light gray. (Other colors are available on special order.)
* Product #954 Joint Sealant is a two component extended polyurethane elastomer self-leveling joint sealant for joints in concrete, asphalt, or metal. When poured into a horizontal joint, Epoxy.com Product #954 is an excellent elastomeric joint sealer with "great memory". Epoxy.com Product #954 is also available for machine mixing.
* Product #964 Polymeric Joint Sealant is a two-component chemically cured polysulfide sealant that provides excellent resistance to bioactivity and the harsh conditions encountered in wastewater treatment plants. Epoxy.com Product #964 Polymeric Joint Sealant cures to a flexible rubber that provides a watertight seal between concrete, masonry, metals, glass, wood, and other construction materials. Epoxy.com Product #964 is available in self-leveling.  Use Product #965 for a non-sag consistency.
* Product #965 Polymeric Joint Sealant is a two-component chemically cured polysulfide sealant that provides excellent resistance to bioactivity and the harsh conditions encountered in wastewater treatment plants. Epoxy.com Product #965 Polymeric Joint Sealant cures to a flexible rubber that provides a watertight seal between concrete, masonry, metals, glass, wood, and other construction materials. Epoxy.com Product #965 is has a non-sag consistency. For a pourable consistency use Product #964.

Tools and Equipment for Installing Epoxy.com Elastomeric Coatings, Elastomeric Decking, and Elastomeric Waterproofing Membrane Systems.