Product Application Guide
Commonly used RESINS
- Epoxy.com Product #12 Epoxy
Primer is a two component, seamless 100% solids epoxy primer
system with High Chemical Resistance and High Bond Strength. The epoxy may
be applied as a primer for most High End Industrial coatings, like Epoxies,
MMA, Polyurethane's, Vinyl Esters, Polyesters, etc.
- Epoxy.com Product #80
Acrylic Sealer- a clear acrylic solution formulated to create
a clear, non-yellowing protective coating.
Epoxy.com Product #80 Acrylic Sealer provides a tough, UV and abrasion
resistant film that effectively protects surfaces from moisture penetration,
staining, dirt, dust, and wear. Providing a surface that is easy to clean
and maintain, Epoxy.com Product #80
Acrylic Sealer is an excellent choice for both interior and exterior
applications.
- Epoxy.com Product #100
Anti-Moisture Entrapment System uses a unique epoxy technology
which allows the contractor to install epoxy system on new concrete (4-5 days
old) without fear of moisture entrapment.
Epoxy.com Product #100 Anti-Moisture Entrapment System exhibits greater than
100 times the permeability of standard epoxy slurries and mortars.
Epoxy.com Product #100 Anti-Moisture Entrapment System is used as a base for
Epoxy.com Chip and Quartz systems and as a binder for Epoxy.com Resinous
Mortar Systems, when moisture is a concern.
- Epoxy.com Product #201 Oil
Stop Primer for instances petroleum can penetrate the surface
of a two component, epoxy-amine undercoating designed to be compatible with
petroleum based oil and greases. In many instances petroleum can penetrate
the surface of concrete floors to the extent that the oil may not be removed
by surface cleaning. If untreated, this oil may migrate back to the surface
to cause a delamination.
- Epoxy.com Product #203 Cold
Temperature Cure Polymeric Primer - is often used in coolers
and food preparation areas that require constant low temperatures. It is
frequently used in room temperature applications to meet super-fast cure,
limited shutdown needs.
- Epoxy.com Product #223 Clear
Water Based Epoxy Curing Compound, Sealer and Bonding Agent
is a two component water based epoxy curing that is used to both cure and
seal concrete and to bond freshly placed concrete to existing concrete. It
is ideally suited as a cure and seal for freshly placed concrete. Its
chemical resistance makes it ideal to seal: stamped concrete, acid stained
concrete, concrete countertops, parapet walls, bridge pier caps, sealing
floors in food processing areas, or any other area that requires a durable,
chemical resistant concrete sealer.
- Epoxy.com Product
#671 Conductive Primer/Sealer is a low viscosity, two
component, carbon filled, polyamide modified conductive primer/sealer
formulated with special wetting agents to provide maximum penetration into
concrete surfaces. Epoxy.com Epoxy.com Product
#671 Conductive Primer/Sealer Conductive Primer/Sealer is ideal for
both new and old concrete surfaces.
Epoxy.com Product #671 Conductive Primer/Sealer provides excellent
resistance to wear, and can be used either alone or as a conductive sealer
or as a conductive primer when used with
Epoxy.com product #674 Electro-Static
Dissipating Urethane Topcoat and
Epoxy.com Conductive Systems.
-
684LV - MMA CONCRETE CRACK HEALER and SEALER is a 100% reactive
ultra-low viscosity methyl methacrylate resin used as a penetrating crack
sealer or to fortify extremely porous concrete substrates. MMA
CONCRETE CRACK SEALER Product #684LV is typically used on bridge
decks, parking structures or as a general penetrating sealer to prevent
moisture intrusion.
- Epoxy.com Product #830 Moisture
Vapor treatment is a two component modified epoxy
system designed to seal concrete and reduce moisture vapor
transmission prior to applying finished flooring.
Epoxy.com Product #830 Moisture Vapor treatment has proven
to reduce moisture vapor emissions and be resistant to damage
from high alkalinity. Epoxy.com Product #830
Moisture Vapor treatment is an environmentally friendly
material containing no hydrocarbons or other solvents making it
zero (0) VOC.
- Epoxy.com Product #899 Epoxy
Primer is a moisture insensitive 100% solids Low-Mod Low
Viscosity Primer and Sealer. It may be used as a primer for any Epoxy.com
product, or as a stand alone sealer.
Back to Table of Contents
Epoxy.com Heavy Duty Industrial Epoxy and Urethane Coating Resin Systems
Here are listing of Epoxy.com epoxy coatings and urethane coatings. The
Epoxy.com Products listed below are either pigmented or available in
pigmented. Related products not specifically covered below are
Primers
and Sealers, and
Flooring
and Decking Systems
- Product
#231 - Water Based Epoxy Emulsion Primer and Sealer is a water
based epoxy primer/sealer designed to have maximum resin penetration into
concrete surfaces to provide high bond strength and adhesion. Product #231
Water Based Epoxy Emulsion Primer and Sealer has very low odor and,
therefore, can be used in occupied areas. Product #231 Water Emulsion Primer
and Sealer has the ability to be applied to recently poured (green) concrete
and achieve excellent adhesion. Product #231 Water Emulsion Primer and
Sealer is ideal for both new and old concrete surfaces. It is used as a
primer for High Build and Thin Film Coating Systems.
- Epoxy.com Product #675
Electrostatic Dissipating Water Borne Epoxy Topcoat is a
pigmented, water emulsion epoxy electro-static dissipative finish
designed to have maximum penetration into concrete surfaces to provide
high bond strength and adhesion. It has very low odor and can be used in
occupied areas as a finish sealer in Thin-Film Electro-Static
Dissipative Coating Systems.
100% Solids "0" VOC Epoxy Coatings
- Epoxy.com Product
#1 All Purpose Coating is a 100% solids epoxy Hi-Build epoxy
coating used for high foot and light forklift traffic areas where abrasion
resistance is required; for protection against mild corrosion; and as a
decorative waterproof coating for walls, floors, tanks, etc . Also available
fast, and Cold Temperature Cure versions.
- Epoxy.com Product #1W
is a two component, 100% solids epoxy Hi-Build epoxy coating used for high
indoor traffic areas where abrasion resistance is required; for protection
against mild corrosion; and as a decorative waterproof coating for walls,
tanks, etc.
- Epoxy.com
Product #1 Fast - is a shorter potlife, and faster setting
version of Epoxy.com Product #1,
-
Epoxy.com Product #1 Cold Temperature Cure is a version of
Epoxy.com Product #1 that sets even faster than Product#1 Fast.
Typically used in colder temperatures, or where an very fast cure is
required.
- Epoxy.com Product #2 Fast is a shorter potlife, and
faster setting version of Product #2
-
Epoxy.com Product #2 Cold Temperature Cure & is a version of
that sets even faster than Epoxy.com Product#2 Fast Cure. Typically
used in colder temperatures, or where an very fast cure is required.
- Epoxy.com Product #204 Cold
Temperature Cure Polymeric Coating
- is a specially formulated coating for cold temperature applications.
Able to cure at temperatures as low as 35�F. It is often used in coolers and
food preparation areas that require constant low temperatures. It is also
frequently used in room temperature applications to meet super-fast cure,
limited shutdown needs.
Chemical Resistant Novolac Epoxy
-
Epoxy.com Product #630 Novolac Coating/Mortar Binder - a
100% solids epoxy Novolac ideal for harsh chemical and solvent resistant
applications. It is ideal for use as a troweled mortar, slurry binder,
and coating for concrete and steel in extremely corrosive areas where
resistance to 98% sulfuric acid or other strong caustics is needed.
Epoxy.com Product #630 Novolac Coating/Mortar Binder is ideal for
use as a protective coating for concrete and steel in the extremely
corrosive areas of chemical plants and pulp mills secondary containment
areas, water and waste treatment, and gas and electric utilities.
- Epoxy.com Product #633 Novolac
Coating is a 100% solids epoxy Novolac coating ideal for harsh
chemical and solvent resistant applications. It is used in secondary
containment, solvent storage, pump pads, trenches, and other high exposure areas.
It is ideal for use as a protective coating for concrete and steel in the
extremely corrosive areas of chemical plants and pulp mills secondary
containment areas, water and waste treatment, and gas and electric utilities.
Epoxy.com Product #633 Novolac Coating is commonly used as a seal coat for
Epoxy.com MORTAR SYSTEMS where chemical resistant performance is
required.
Product #661 Vinyl
Ester Binder Adhesive is a clear, 100% reactive, vinyl
ester novolac used to coat or line concrete or steel surfaces in
chemically aggressive industrial environments. It is used for coating
primary and secondary containment, trenches, troughs, pump pads, and
equipment.
Product #662 Vinyl Ester Aggregate
Product #663
Vinyl Ester Coating is a 100% reactive, vinyl ester novolac used to coat
concrete or steel surfaces in chemically aggressive industrial
environments. Due to its high molecular weight and low permeability, it
will withstand exposure to bond range of acids, caustiec and solvents.
It is designed as a coating for secondary containment, trenches,
troughs, pump pads, equipment and structural members. Low Temperature
accelerators are available for positive cure at temperatures down as low
as 33� F.
Coal Tar Epoxy Product
#209 is a two component 100% solids epoxy coating designed
for applications to petroleum contaminated concrete, coating asphalt
based surfaces, clean
concrete, cement, and
properly prepared steel.
Back to Table of Contents
Epoxy.com Seamless Industrial Epoxy Flooring
Products Typically Used for Epoxy.com Flooring
Most of Epoxy.com Coatings can also be used to
make seamless floors. Some of the Seamless Flooring Systems below will also
benefit from the use of a Primer.
Contact Epoxy.com Technical Support for details.
- Epoxy Systems Product #10
a 100% solids Lo-Mod Low Viscosity adhesive used as a binder for epoxy
mortar systems in patching and grouting applications, as a seal coat for
non-skid surfaces outside, and as a primer to insure high bond strength for
coatings and patches.
- Epoxy.com Product #10 Lo-Mod Adhesive and Mortar Binder is a 100% solids epoxy has a low modulus of elasticity (flexibility) and is Low Viscosity. An adhesive used as a binder for epoxy mortar systems in patching and grouting applications, as a seal coat for non-skid surfaces outside, and as a primer to insure high bond strength for coatings and patches.
- Epoxy.com Product #10 Fast Curing Version
- Epoxy.com Product #10 Cold Temperature Curing Version
- Epoxy.com Product #15 Chemical Resistant Flooring Resin - a two component, seamless 100% solids epoxy resurfacing system with High Chemical Resistance. It may be applied as a coating, or combined with silica sand or Epoxy.com multi-colored quartz aggregate to produce a durable, easy to maintain floor, on both new and old surfaces. Epoxy.com Product #15 Chemical Resistant Flooring Resin has superior clarity and UV stability.
- Epoxy.com Product #32 Flexible Epoxy Membrane is a flexible resin used as an epoxy membrane and as a Product #32 mortar. Epoxy.com Product #32 Flexible Epoxy Membrane is a two component, 100% solids epoxy used as a base in many Epoxy.com Floor and Mortar Systems. Epoxy.com Product #32 Flexible Epoxy Membrane resists cracking caused by horizontal substrate movement, providing a crack resistant, resilient, sound absorbent, waterproof, durable floor. Epoxy.com Product #32 Flexible Epoxy Membrane offers stress-relieving properties for floor slabs that show movement or vibration.
Epoxy.com Product #32 is excellent for use in areas such as mechanical equipment rooms, large animal rooms and activity centers.
- Epoxy.com Product #100 Anti-Moisture Entrapment System uses a unique epoxy technology which allows the contractor to install epoxy system on new concrete (4-5 days old) without fear of moisture entrapment. Epoxy.com Product #100 Anti-Moisture Entrapment System exhibits greater than 100 times the permeability of standard epoxy slurries and mortars. Epoxy.com Product #100 Anti-Moisture Entrapment System is used as a base for Epoxy.com Chip and Quartz systems and as a binder for Epoxy.com Resinous Mortar Systems, when moisture is a concern.
- Epoxy.com Product #206 Cold Temperature Cure Pigmented Polymeric Flooring Resin is a specially formulated binder for cold temperature applications. Able to cure at temperatures as low as 35°F. It is often used in coolers and food preparation areas that require constant low temperatures. Epoxy.com Product #206 Cold Temperature Cure Pigmented Polymeric Flooring Resin is also frequently used in room temperature applications to meet super-fast cure, limited shutdown needs. Is available in clear or colors.
- Epoxy.com Product #214 - This
material was originally designed as a bar top and casting resin, but has
been used where super-flat floors are required. It has been used in clean
rooms used to produce equipment for the space industry. It has also been
used to level the floors of network television studios. It has been
used to level stages and and dance floors in NY and Los Vegas. Product
#214 is an all-purpose, low viscosity Epoxy System that forms a glossy, hard surface, which is resistant to stains. Epoxy.com Product #214 Tabletop Resin has excellent clarity and color retention. It is essentially odorless and can therefore be used in occupied areas
- Epoxy.com Product #235 Chemical Resistant Novolac Epoxy Tile Grout and Adhesive is a highly chemical resistant, industrial grade, Novolac epoxy grout for ceramic tile, quarry tile, brick pavers, and stone. Epoxy.com Product #235 Chemical Resistant Novolac Epoxy Tile Grout and Adhesive is supplied in pre-packaged kits containing resin, hardener, and mineral fillers that produce a dense, uniform seal. Typical applications for Epoxy.com Product #235 Chemical Resistant Novolac Epoxy Tile Grout and Adhesive require superior resistance to thermal shock, chemicals, and heavy traffic found in the harsh environments of dairies, bakeries, meat packers, breweries, canneries, bottlers, distilleries, and pharmaceutical plants
- Epoxy.com Product #315BC Polymeric Coating and Base Coat for the 315Chip Flooring System. It can also be used as a stand alone coating. If Epoxy.com Product #315BC is used as a stand alone coating over concrete, it is recommended that you first prime with Product #899 Primer.
- Epoxy.com Product #315BC - Fast Same as Product #315BCPolymeric Coating for Base Coat for the 315Chip Flooring System, but with a fast cure.
- Epoxy.com Product #315BC-Cold Similar to Product #315BC Polymeric Coating for Base Coat for the 315Chip Flooring System, but with a cold temperature cure.
- Epoxy.com Product #629 Chemical Resistant Conductive Flooring is a 100% solids epoxy Novolac Conductive coating ideal for severe chemical and solvent storage requiring conductive and spark proof surfaces. Applied at a nominal 1/16 inch, the
Epoxy.com Product #629 Chemical Resistant Conductive Flooring offers the superior chemical resistance of a Novolac Resin System while maintaining a conductive surface.
- Epoxy.com Product #630 Novolac Coating/Mortar Binder - a 100% solids epoxy Novolac ideal for harsh chemical and solvent resistant applications. It is ideal for use as a troweled mortar, slurry binder, and coating for concrete and steel in extremely corrosive areas where resistance to 98% sulfuric acid or other strong caustics is needed.
Epoxy.com Product #630 Novolac Coating/Mortar Binder is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities.
- Epoxy.com Product #632 Novolac Control Joint Filler
is a 100% solids flexible Novolac epoxy Chemical Resistant joint filler for saw-cut joints of concrete slabs on grade.
- Epoxy.com Product #670 Vinyl Ester General Purpose is formulated from a vinyl ester, low viscosity resin of 100% reactive solids in a composite with inorganic fiber reinforcement. It provides the ultimate in chemically resistant properties to prevent deterioration where reactive chemicals exist
- Epoxy.com Product #671 Conductive Primer/Sealer is a low viscosity, two component, carbon filled, polyamide modified conductive primer/sealer formulated with special wetting agents to provide maximum penetration into concrete surfaces.
Epoxy.com Product #671 Conductive Primer/Sealer is ideal for both new and old concrete surfaces.
Epoxy.com Product #671 Conductive Primer/Sealer provides excellent resistance to wear, and can be used either alone or as a conductive sealer or as a conductive primer when used with
Epoxy.com product #674 Electro-Static Dissipating Urethane Topcoat and
Epoxy.com Conductive Systems.
- Product #672 Conductive Epoxy is a two component, 100% solids epoxy/aggregate material that utilizes the latest in conductive floor technology.
Product #672 Conductive Epoxy can be installed as a coating or as a component to Epoxy.com Flooring Systems. It can also include
Epoxy.com Elastomeric Membranes to produce waterproof, crack resistant Systems. Typical Uses of include: Ammunitions Facilities, Paint and Solvent Storage Areas, Electronic Component Plants Hazardous Materials Storage Areas
- Epoxy.com Product #674 - Electrostatic Dissipative Urethane Coating is a two component, Electrostatic Dissipative chemical resistant, polyurethane coating. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and superior color retention.
Epoxy.com Product #674 - Electrostatic Dissipative Urethane Coating can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangars, animal housing, and vehicle maintenance facilities. Available in both clear and pigmented formulations,
Epoxy.com Product #674 - Electrostatic Dissipative Urethane Coating can be used as a finish coating option for most Epoxy.com Flooring Systems.
- Epoxy.com Product #675 Electrostatic Dissipating Water Borne Epoxy Topcoat is a pigmented, water emulsion epoxy electro-static dissipative finish designed to have maximum penetration into concrete surfaces to provide high bond strength and adhesion. It has very low odor and can be used in occupied areas as a finish sealer in Thin-Film Electro-Static Dissipative Coating Systems.
Methyl Methacrylate - MMA
- Anti-skid Fine
- Anti-Skid Course
- Epoxy.com Product #66 Round Quartz Colored Fine
- a pure silica sand as the basic mineral. Silica is an extremely hard abrasion resistant and chemically inert mineral, ideal for use in conditions that - at times - may be severe. Flooring surfaces produced with high density silica combined with Industrial Flooring Resins produced by us consistently show greater resistance to wear than surfaces filled with minerals or many other resins or binders.
- Epoxy.com Product #67 Rounded Quartz Colored Medium Aggregates - Similar to Product #66, but larger.
- Epoxy.com Product #68 Angular Quartz -
Similar to Product #66 but angular
- Epoxy.com Product #71 Fumed Silica Thixotropic Agent
- Epoxy.com Product #75 Silica Filler is a very clean, specially graded natural silica aggregate.Epoxy.com Product #75 Silica Filler is oven dried just prior to packaging, this makes it suitable for use in epoxy grouts. When mixed with Epoxy.com products, Epoxy.com Product #75 Silica Filler makes excellent high strength products .
- Epoxy.com Product #77 Broadcast Sand
- Epoxy.com Product #78 Self Leveling Filler - is a specially graded blend of fine dry silica sands, designed as a self leveling filler for Epoxy.com 100%Solids Epoxy Mortar Products. It is dried before bagging. Epoxy.com Product #78 Self Leveling Filler works best when being used with a low viscosity resin like Epoxy.com Product #10, Product #24 and Product #28. The amount of Epoxy.com Product #78 Self Leveling Filler that you add can be varied for the application.
- Epoxy.com Product #81 Epoxy Gel Extender is a specially formulated blend of fine granules and plasticizers for use with trowelable (thixotropic) epoxy materials.
- Epoxy.com Product #82 Mortar Blend Aggregate
- Epoxy.com Seamless Resurfacing
Chips combines this high tech filler with Epoxy.com Product
#315 Polymeric Multi-Colored Flake Floor Resurfacing System or other
resins, to make a highly attractive, highly durable, highly affordable
seamless resurfacing system. This combination is one of the most unique and
advanced system available on the market today.
- Epoxy.com Product #720 Cove Base Binder
- can be used to install an integral cove base for most Epoxy.com Flooring Systems, to provide seamless wall to floor protection.
|